Product description:
A barrel (30L SUS304 stainless steel barrel) :
30L/20L/10L/5L optional, constant temperature heating + constant speed prevention
Precipitation stirring + shortage alarm + vacuum feeding function is optional
B barrel (30L SUS304 stainless steel barrel) : 30L/20L/10L/5L optional, constant temperature heating + constant speed anti-precipitation stirring + lack of material alarm + vacuum feeding function optional
C barrel (2L SUS304 stainless steel cleaning barrel) :
Precision screw metering pump + precision gear metering pump + brushless movement
State mixing mixing out glue + semi-automatic cleaning (pump configuration depends
According to the nature and quantity of glue selection)
Overall dimensions:
700mm*1380mm*1570mm
1. It has the functions of continuous interpolation of points, lines, surfaces, arcs, circles, irregular curves and three-axis linkage, and can adapt to the gluing of any irregular objects.
2. The large hard disk storage memory capacity can store unlimited programs without reprogramming, and the software has regional array, translation and rotation calculation and other functions.
3. The glue volume, thickness, gluing speed, gluing time and stop time can all be set as parameters, and the glue output is stable without dripping.
4. The three functions of glue mixing, glue pouring and track pouring are integrated and fully automatic.
5. According to the demand ratio, glue pouring can be realized while mixing the table, and glue is saved to the maximum extent.
6. Double barrel design, A glue and B glue are stored separately to ensure that the glue will not solidify after being placed for a long time.
7. The mixing ratio is adjustable from 1.00:1 to 10.00:1, and static or dynamic mixing is adopted to mix evenly and fully.
8. The unique control system is not affected by air pressure factors, avoiding uneven glue output, drawing, bubbles and other phenomena.
9. Multiple glue filling modes can be freely switched. You can fill A glue, B glue or AB glue quantitatively separately, or manually fill A glue, B glue or AB glue. If you have special requirements, you can use a multi-stage quantitative glue filling mode. You can perform five-stage quantitative glue filling (the glue output amount and glue output speed of each stage can be set separately).
10. Equipped with automatic feeding and suction function to save manual feeding time and improve work efficiency.
11The storage tank is equipped with a liquid level sensor switch, automatic alarm for insufficient material and full material, and automatic shutdown protection for insufficient material.
12.Equipped with glue stirring, optional heating and reserved vacuum degassing function, suitable for different types of injection processes.
13. Equipped with production counting, single piece timing and operation monitoring alarm functions.
14. The AB pump pulse coefficient setting wizard function is convenient for adapting to different types of glue from different manufacturers.
15. Reserved card pump detection and flow monitoring functions. Optional for customers with high glue ratio and small error range.
16. Intelligent automatic rinsing function, multiple automatic cleaning modes to adapt to different environments.
17. Anti-solidification sweeping sequence to prevent equipment from suspending glue filling and glue hardening to block pipes and valve bodies.
18.The cleaning agent circulation system can improve the utilization rate of cleaning agents and effectively reduce waste.
19. The unique glue anti-solidification mode can effectively prevent the phenomenon of mixing head solidification caused by employee negligence.
Audited Supplier 
){kind=link}